Those two parts will work 51. Make sure you get the correct style and voltage bulb for however you are going to monitor the circuit. If you follow the diagram that comes with the board, it shows splitting the 12v side. You still have to have correct polarity but if you hook it wrong, it has protection so you don't ruin the board. AT least that's what I think I remember Surfy Bear telling me. 
The board isn't grounded. The single mounting screw is insulated from all circuitry.
- Home
- News
- Submit News
- Contact
- Contests
- Donations
- Downloads
- Forums
- Guitar Instruction
- IRC
- Member List
- Private Messages
- Podcast
- Polls
- Photo of the Day
- Links
- Search
- Store
- Surf Band Map
- Wiki
- Yahoo Group
Photo of the Day
Shoutbox
SHADOWNIGHT5150:
Bank accounts are a scam created by a shadow government
270 days ago
sysmalakian:
TODAY IS MY BIRTHDAY!
256 days ago
dp:
dude
237 days ago
Bango_Rilla:
Shout Bananas!!
192 days ago
BillyBlastOff:
See you kiddies at the Convention!
176 days ago
GDW:
showman
127 days ago
Emilien03:
https://losg...
49 days ago
Pyronauts:
Happy Tanks-Kicking!!!
42 days ago
glennmagi:
CLAM SHACK guitar
28 days ago
Hothorseraddish:
surf music is amazing
8 days ago
IRC Status
#ShallowEnd is empty.
Current Polls
No polls at this time. Check out our past polls.
Current Contests
No contests at this time. Check out our past contests.
Donations
January Birthdays
- 1st – antivirustales2, baccalaureateacademy, bookalimolv, helpemailtales2, Hitasg2, John_Lavelle, lootedbraincase, LosKioskBears, MariahDouglas, nevastechgpsupport, Printertales, SNOKE, tashannrestaurant, topstik, tubedogsurf
- 2nd – jonesrobertt, nsalmon, SpeedWave1, Syndicateofsurf
- 3rd – 2nanfer, 3Alex3, SurferHodadVR
- 4th – JonnyAngle, Wayfarer65, Wayfarer99
- 5th – dragonfly, JeremyeTheSurfRockGuy, UnsteadyFreddie
- 6th – Harkey, ReverbMadness, vendetta
- 7th – eltwang, oceansandoceans, squirt50
- 8th – Daddy, jamescouts, Mike_Vivisector
- 9th – BDUPRE, MedievalSurf, Shadowtone, TheFintastics
- 10th – 6strman1515, andrewstaff, samurairish, tattoo_bossman
- 11th – AlanSurf, BullSkullGuitars, odicolon
- 12th – dickhutchins
- 13th – Fender_Bender, jimbones, launchpad_mcquack, ricktrev, Rob_Markham, Slikbeer, WRAYMAN
- 14th – countrymen46, Rockandre, surf_music_is_not_dead
- 15th – JCStilley, Mr_Bill, SurfFan, twoslices
- 16th – Sha666yLabestia, TeteOrta, Vanhaye
- 17th – kenjolly, MountU, Sonichris, TommyCGuitar
- 18th – CousinMary, Nilstempo, Piratowill, TBZ
- 19th – bursky_ozbekov, Gerrym, SlotRods
- 20th – chrisparks, JoeySunset, leandroafonso85, Padraig
- 21st – BATLORD, budman1950, joebonni, PappyYokum, rottenman, SilverFlash, srf83
- 22nd – Davo, schoub, stratocastermotion, surfindave
- 23rd – Henry_Marechiaro, mitchvreed, TontoFSchwartz
- 24th – JeffLeites, JIMMYLIMO, JohnnyR, The_Cholla
- 25th – mrgraham58
- 26th – gremmie1, Jakehooker, mathead, NoisyDad, PLASTICCARZ, The_Patman, whiz1943, Wombat
- 27th – biworm, ldk, moseseatonjr, Outerwave_Allen, SL35Steve, tentaclejoe
- 28th – adammzgonzalez, brischneider14, Dbunny23, smallfish
- 29th – HapHazzard, hoagiebait, JetBlue, Kirill, reknball
- 30th – instit, wiggins
- 31st – BearJW, DaveF, normj, RistoA, thunderbass
SurfGuitar101 Forums » Gear »
The Surfy Bear Fet Reverb
• New Topic
Top
Joined: Dec 11, 2011 Posts: 2130 
|
Posted on Dec 22 2016 04:46 PM
|
Joined: May 04, 2014 Posts: 734 
|
Posted on Dec 23 2016 12:43 AM
Clarry wrote:
It was a coincidence I spotted the problem. Glad you got it sorted. |
Joined: Jul 06, 2010 Posts: 596 Stockholm 
|
Posted on Dec 23 2016 02:57 AM
wfoguy wrote:
Yes, thats correct! I decided this was a good idea since many 12V adapters have the opposite polarity compared to the standard 9V pedal-adapters. This means there is a considerable risk for reverse polarity supply voltage. /Björn |
Joined: Dec 22, 2016 Posts: 3 |
Posted on Dec 25 2016 03:13 AM
So if I buy a center negative power supply, what would be the correct solder point ? |
|
Joined: Dec 11, 2011 Posts: 2130
|
Posted on Dec 25 2016 04:33 PM
51, no matter what you have on the power supply, you still will run positive to positive and negative to negative. As long as you are sure you have the correct polarity, it will work. The board won't know how the adapter is run, only that it has the correct polarity where you solder to the power connections on the board. As a safe guard, plug your power supply into the adapter and check the connections where you solder the wires on and check polarity. This will verify that the center is negative. Just remember to always use that style of adapter. |
Joined: Jun 26, 2007 Posts: 399 Cleveland, Ohio
|
Posted on Dec 26 2016 07:46 AM
While on the topic of power supply, I just picked up a 1 Spot Pro CS7 which comes with a "reverse polarity converter" plug that works great with the 12v Surfy Bear Fet Reverb. |
Joined: Dec 20, 2012 Posts: 178 Oklahoma
|
Posted on Dec 26 2016 08:26 AM
My toolbox transformation! Now I gotta wait for my patina solution to dry,then I will clear coat and rivet on all the handles and latches. I couldn't deal with just a plain od green box....I had to surf it up and make it nasty! Received my Surfy Bear yesterday! Got it all soldered up except I'm waiting on my new bigger jeweled lamp i ordered the other day after being jealous of everyone elses. I am also waiting on a new RCA cable to arrive. Once it's all here,which should be tomorrow....it's on!!! —If you want the ultimate,you gotta be willing to pay the ultimate price. Brett |
|
Joined: Dec 20, 2012 Posts: 178 Oklahoma
|
Posted on Dec 26 2016 01:00 PM
Got the latches and handle riveted back on! Now to drill holes for the SB! —If you want the ultimate,you gotta be willing to pay the ultimate price. Brett |
|
Joined: Dec 20, 2012 Posts: 178 Oklahoma
|
Posted on Dec 26 2016 02:01 PM
Any if you guys chop these little tabs off? It's making my pots sit crooked.....wondering if it serves an important purpose....if not I shall chopem! —If you want the ultimate,you gotta be willing to pay the ultimate price. Brett |
Joined: Sep 06, 2012 Posts: 1300 Lawrenceville , GA
|
Posted on Dec 26 2016 02:23 PM
Just adjust the nut on the pot shaft. |
Joined: Mar 27, 2006 Posts: 210 Newington, CT USA
|
Posted on Dec 26 2016 02:38 PM
I cut mine off with a pair of wire cutters, then filed down the edge. |
|
Joined: May 04, 2014 Posts: 734
|
Posted on Dec 26 2016 02:46 PM
Unless you can use two nuts per pot to create a bit of space for the tabs, you can just snap them off with a pair of pliers. Or you can drill small holes for the tabs to fit in. That's how they're supposed to be mounted. |
|
Joined: Dec 20, 2012 Posts: 178 Oklahoma
|
Posted on Dec 26 2016 03:11 PM
I ended up scavenging some extra pot nuts from an old crappy overdrive,so ima save myself some trouble and go that route! Thanks! —If you want the ultimate,you gotta be willing to pay the ultimate price. Brett |
|
Joined: Nov 16, 2013 Posts: 4536 Wisconsin
|
Posted on Dec 26 2016 03:20 PM
Latherman87 wrote:
Just use a pair of wire cutters & bend it over prying/wiggling & it should snap off; no need to actually "cut" it. Most times these things aren't needed; I've crunched a bunch of 'em off in pedal builds as they do exactly what's irritating you. —Wes DISCLAIMER: The above is opinion/suggestion only & should not be used for mission planning/navigation, tweaking of instruments, beverage selection, or wardrobe choices. |
Joined: Aug 29, 2009 Posts: 1556 Israel 
|
Posted on Dec 26 2016 04:27 PM
cambeezy wrote:
The PS you linked, each 12V out can supply only 200mA, while for reliable operation the Surfy-Bear requires 1000mA. Like wfoguy said, Latherman87, Last edited: Dec 26, 2016 16:38:20 |
|
Joined: Dec 20, 2012 Posts: 178 Oklahoma
|
Posted on Dec 26 2016 09:58 PM
Another update! Holes are drilled.....proper surfy bear sticker applied and all labels done. Nothing about this thing is done very clean,but I think it all makes for a better look! My brother in law thought he would be funny while making my labels....as you can see the "inputtt" I actually think it looks pretty rad! Tomorrow I should finish it all! —If you want the ultimate,you gotta be willing to pay the ultimate price. Brett |
|
Joined: Jun 26, 2007 Posts: 399 Cleveland, Ohio
|
Posted on Dec 27 2016 09:21 AM
DreadInBabylon wrote:
Good point Ariel! |
Joined: Jul 24, 2012 Posts: 2762 Finknabad, Squinkistan 
|
Posted on Dec 27 2016 07:07 PM
Latherman87 wrote:
The label fun reminds me of when we were high schoolers just getting started messing around with guitars and amps and used a label maker to designate a 2w ss flashlight amp a "Marshall" and the controls on a Memphis bolt-neck LP "POW R", "ENTHUSIASM", "BRITE" and "POLISH". |
|
Joined: Dec 20, 2012 Posts: 178 Oklahoma
|
Posted on Dec 28 2016 07:27 PM
It's alive!!!!!! And oh so drippy! —If you want the ultimate,you gotta be willing to pay the ultimate price. Brett |
|
Joined: Dec 20, 2012 Posts: 178 Oklahoma
|
Posted on Dec 28 2016 07:29 PM
It all adds character haha! —If you want the ultimate,you gotta be willing to pay the ultimate price. Brett |
Please visit our friends in the surf music community:
Contact Us • About Us • Terms of Service • Privacy Policy • Colophon
SurfGuitar101.com © 2004 - 2024 by Brian Neal. All comments and user contributed articles are property of the posters.
Thanks to all the surf bands, past and present. And thanks to all the fans who care about and keep surf music alive.