The Surfy Bear Fet Reverb

Photo of the Day

Rich and Eddie B

Shoutbox

SHADOWNIGHT5150: I like big reverb and i cannot lie
250 days ago

SHADOWNIGHT5150: Bank accounts are a scam created by a shadow government
250 days ago

sysmalakian: TODAY IS MY BIRTHDAY!
236 days ago

dp: dude
217 days ago

Bango_Rilla: Shout Bananas!!
172 days ago

BillyBlastOff: See you kiddies at the Convention!
157 days ago

GDW: showman
108 days ago

Emilien03: https://losg...
29 days ago

Pyronauts: Happy Tanks-Kicking!!!
23 days ago

glennmagi: CLAM SHACK guitar
9 days ago

Shout History

Please login or register to shout.

IRC Status

#ShallowEnd is empty.

Need help getting started?

Current Polls

No polls at this time. Check out our past polls.

Current Contests

No contests at this time. Check out our past contests.

Donations

Help us meet our monthly goal:

100%

100%

Donate Now

December Birthdays Cake

1st – Bohdan, Dcarter, Diego_Stringbreaker, Geordie
2nd – A6133049, Instro_Maniac, jakewis10, Marsboundmind, Mercatello_Surf_Beach, Monsieur_Bidet
3rd – cladinshadows, Surfersaurus, Surf_Skater
4th – DrooperCell, Mess333, THEDAWNPATROL
5th – Danilyaster, Hank, hlieboff59, Rouserman73, willmarshall
6th – capecodsound, Death_Wave, Leon, mr_eliminator
7th – BigKen, Boost, flybytrade, Jousse, vankeir
8th – CaboSanSurf, Gravitational_wave_rider, Julien_ferran, PrestonRice, SurferBill
9th – gerhard_k, Guitardmm, HonestRed, ilCattivo, lvdeknegt
10th – JohnnyGlaze, roytheodd, RR, SurfinZombie, Vince_Vincent
11th – bigjohnbates, Gaetan, GrandFoobah, ihomi, salvatore
12th – Camshaft, CrewsControl, Desertdancer, Mikebat
13th – carranti, DOBS
14th – CalebAaron666, deabud, thealderking
15th – arny, clepak, customxke, Highlyrestrung, jackndabox
16th – ChazMatt70, Gilette, maxhixon, nickclark73, tired
17th – kenposurf, loulouchecentipede, MallabonUK, MrBackwards, SauveZouave
18th – kkern, mrjake13, mulletmonster
19th – cutipaste, petergunn, phoneskopecom, Preston
20th – Rockarockets
21st – Dr_Korhonen, JohnA, poncho13
22nd – aqualadius, Coley, Rt4957, Stephen
23rd – EdRadakovitz
24th – Shorgasmatron
25th – gman5ohh
26th – genkigenkipanic, HeroSandwich
27th – captmike, nacho_grande
28th – Corey_Y, jonny_flatbottle, Mrgreen, revmike, SirBLaughs, surfbeatnik
29th – DonnyDorsal, LarryLugz
30th – Canopy, James_Violet, JohnnyAlmost, shadowlink867, swelltone, xDelstar
31st – Coko_Tagle, crmartin, Geoff_Vane, Pablomago, SurfSound1963

SG101 MP3 Comps

2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023

SurfGuitar101 Forums » Gear »

The Surfy Bear Fet Reverb

• New Topic

stratdancer Joined: Dec 11, 2013 Posts: 2533 Akron, Ohio	Posted on Jul 08 2014 06:15 PM LeeVanCleef wrote: stratdancer wrote: I'd like a Tad but not available here. The MOD pans available in the US are the same as Tube Amp Doctor's rebranded TAD pans. Really? How cool is that. Thanks man!!! image — The Kahuna Kings https://www.facebook.com/pages/The-Kahuna-Kings/459752090818447 https://thekahunakings.bandcamp.com/releases Top
ludobag Joined: Jun 05, 2010 Posts: 620 at south of	Posted on Jul 11 2014 05:46 AM recept this morning i am in hurry to try it Top
bjoish Joined: Jul 06, 2010 Posts: 596 Stockholm	Posted on Jul 11 2014 06:13 AM Top
stratdancer Joined: Dec 11, 2013 Posts: 2533 Akron, Ohio	Posted on Jul 11 2014 06:51 PM bjoish, I am going to order the kit but wanted to know what MOD Reverb tank would go with the circuit. http://www.amplifiedparts.com/products/reverb_tanks — The Kahuna Kings https://www.facebook.com/pages/The-Kahuna-Kings/459752090818447 https://thekahunakings.bandcamp.com/releases Top
bjoish Joined: Jul 06, 2010 Posts: 596 Stockholm	Posted on Jul 12 2014 03:42 AM If you want the same sound as from a 6G15 you should choose the same type. As the Surfguitar101 wiki describes it: "The correct PN for a Fender replacement outboard reverb pan meant to hang vertically, as opposed to one lying horizontal in the bottom of a combo amp, is PN 4AB3C1C" The impedances should be 8ohm-in + 2250ohm-out. The PN for horizontal placement is:4AB3C1B Maybe somebody here knows if it matters which side is up for horizontal placement?? Top
ludobag Joined: Jun 05, 2010 Posts: 620 at south of	Posted on Jul 12 2014 04:51 AM normally the open side down http://www.amplifiedparts.com/products/P-RK-4AB3C1B in my deluxe the pan is mount this way and in the bag there is cartboard under the pan (i think is for isolate vib from the amp) Top
crumble Joined: Sep 09, 2008 Posts: 3158 Guildford England	Posted on Jul 12 2014 04:58 AM ludobag wrote: normally the open side down http://www.amplifiedparts.com/products/P-RK-4AB3C1B in my deluxe the pan is mount this way and in the bag there is cartboard under the pan (i think is for isolate vib from the amp) I believe they hang the springs differently for side mounted tanks. Not sure how it's done though, maybe someone knows. Top
stratdancer Joined: Dec 11, 2013 Posts: 2533 Akron, Ohio	Posted on Jul 12 2014 07:49 AM I've read that there is little difference in reverb between the horizontal and vertical pans. Any truth to that? I also think I want a medium length reverb tank. I get a nice drip from my Twin with the return going into the normal channel but to much dwell that I can't control. I was hoping to to build this to fire the reverb hard for drip but not have the cave like dwell. Any thoughts? — The Kahuna Kings https://www.facebook.com/pages/The-Kahuna-Kings/459752090818447 https://thekahunakings.bandcamp.com/releases Top
JObeast Joined: Jul 24, 2012 Posts: 2762 Finknabad, Squinkistan	Posted on Jul 12 2014 10:05 AM Isn't the long dwell time (more properly, sustain of reverberated signal) a function of the coils' physical characteristics? I believe someone posted that the middle digit in the part# ought to be lower – a 1 or 2 rather than 3 – to help achieve short reverb sustain. The Dwell knob on a reverb circuit controls input to the transducer driving the coil, right? Since I got my Twin BF'd and reverted to original specs (was a miracle it functioned at all previously with all the wack mods) I now have the Reverb Return going into the Normal Channel input for more Drip but as Stratdancer says, the long reverb sustain is overpowering. — Squink Out! Top
stratdancer Joined: Dec 11, 2013 Posts: 2533 Akron, Ohio	Posted on Jul 12 2014 10:27 AM JObeast wrote: Isn't the long dwell time (more properly, sustain of reverberated signal) a function of the coils' physical characteristics? I believe someone posted that the middle digit in the part# ought to be lower – a 1 or 2 rather than 3 – to help achieve short reverb sustain. The Dwell knob on a reverb circuit controls input to the transducer driving the coil, right? Since I got my Twin BF'd and reverted to original specs (was a miracle it functioned at all previously with all the wack mods) I now have the Reverb Return going into the Normal Channel input for more Drip but as Stratdancer says, the long reverb sustain is overpowering. Did you run the return through a tubescreamer on the return line? Maximum drip and it sounds incredible but dwells on forever when maxed. I am going to order the mid reverb pan for my surfy bear and hopefully find a balance of drip and less dwell between both reverb instigators. — The Kahuna Kings https://www.facebook.com/pages/The-Kahuna-Kings/459752090818447 https://thekahunakings.bandcamp.com/releases Top
ludobag Joined: Jun 05, 2010 Posts: 620 at south of	Posted on Jul 12 2014 10:47 AM tested and approuved then first my 12 v power supply sucks lot of hum cause it isn't regulated then i try with my ibanez power supply for 9v effect who is regulated it works ,but before i need to invert the pan ? the red on the white of my deluxe pan ?like the mod or tad on real tank on the pan it is writen input white then i send the input signal of the fet reverb in and in fact for working need to invert the pan ??(fender invert the sens of pan ?) all my pot are invert they descrease when i go up ? maybe wrong wiring then need to invert the 2 wires or invert the writing (more simple) need a good power supply ,a tad pan and to make a nice cab for all of this but you can go it sound and it is not harsh as i famous effect!really near the real deal to my taste edith i find another 12 v power supply and it works even better need to make a nice box for it also put a toggle Last edited: Jul 12, 2014 13:53:34 Top
bjoish Joined: Jul 06, 2010 Posts: 596 Stockholm	Posted on Jul 12 2014 03:24 PM ludobag wrote: normally the open side down http://www.amplifiedparts.com/products/P-RK-4AB3C1B in my deluxe the pan is mount this way and in the bag there is cartboard under the pan (i think is for isolate vib from the amp) Yeah, thats what I heard too! I was wondering if it would work just as good with the pan horizontally upside down... I am trying to find a way of building a real compact cabinet. Top
bjoish Joined: Jul 06, 2010 Posts: 596 Stockholm	Posted on Jul 12 2014 03:29 PM ludobag wrote: but you can go it sound and it is not harsh as i famous effect!really near the real deal to my taste edith i find another 12 v power supply and it works even better need to make a nice box for it also put a toggle Great! So apart from a new 12V power supply and rewiring the pots it works ok? Top
ludobag Joined: Jun 05, 2010 Posts: 620 at south of	Posted on Jul 12 2014 04:56 PM Yes Works really well ,i have play It fews hours since and really like It The more i like It is interactions with the pick (,a thing i don t have with the fvr1, only ice pick ) It is really easy to set up and you have lot of different sound With the de luxe pan it drip already a lot You know what ,i Am happy Top
JObeast Joined: Jul 24, 2012 Posts: 2762 Finknabad, Squinkistan	Posted on Jul 13 2014 12:46 AM This is verging on a hijack of the Surfy Bear Thread... but no, I havent boosted the Return signal yet. I have a Fulldrive FDII (1st version) and a Rangemaster clone. One of those might make it sound more awesome... Jonesing for the Surfy Bear FET circuit, the 'poor man's 6G15', but too damn broke to pop even $100 for the whole shebang. stratdancer wrote: JObeast wrote: Isn't the long dwell time (more properly, sustain of reverberated signal) a function of the coils' physical characteristics? I believe someone posted that the middle digit in the part# ought to be lower – a 1 or 2 rather than 3 – to help achieve short reverb sustain. The Dwell knob on a reverb circuit controls input to the transducer driving the coil, right? Since I got my Twin BF'd and reverted to original specs (was a miracle it functioned at all previously with all the wack mods) I now have the Reverb Return going into the Normal Channel input for more Drip but as Stratdancer says, the long reverb sustain is overpowering. Did you run the return through a tubescreamer on the return line? Maximum drip and it sounds incredible but dwells on forever when maxed. I am going to order the mid reverb pan for my surfy bear and hopefully find a balance of drip and less dwell between both reverb instigators. — Squink Out! Top
Teiscofan Joined: Feb 21, 2011 Posts: 513 Ontario	Posted on Jul 13 2014 07:23 AM Just ordered in the FET Reverb from Surfy Bear. Also ordered a horizontal MOD pan. I am looking forward to this project. Has anyone done build thread? — I am not obsolete, I am RETRO.... Top
ludobag Joined: Jun 05, 2010 Posts: 620 at south of	Posted on Jul 14 2014 07:07 AM welcome to the club of surfy bear reverb fet user's i need to order somme thing to make the cab ,and to have a chassis made (i will try an aluminium one diy ) bur as i beguin i send some pics Top
Teiscofan Joined: Feb 21, 2011 Posts: 513 Ontario	Posted on Jul 14 2014 04:52 PM I picked up the Fender grill cloth for the front of the box today... I dont want to hijack this thread so if I am someone let me know...... I imagine that the metal enclodure is just for the circuit board? Is there a need to line the entire box like the cavity on a guitar? I have never seen the inside of a reverb unit........ — I am not obsolete, I am RETRO.... Top
JObeast Joined: Jul 24, 2012 Posts: 2762 Finknabad, Squinkistan	Posted on Jul 14 2014 06:30 PM I like the vintage tool box enclosure – a readymade, cheap to boot, with a certain grease-monkey panache. What is the cheapest solution for a chassis? — Squink Out! Top
stratdancer Joined: Dec 11, 2013 Posts: 2533 Akron, Ohio	Posted on Jul 14 2014 06:56 PM I haven't decided how or what I am putting this unit in but I like the idea of the tool box with a pull out tray to mount the knobs and board on the underside. JO, you've got to try to boost that return signal. It makes an enormous difference! — The Kahuna Kings https://www.facebook.com/pages/The-Kahuna-Kings/459752090818447 https://thekahunakings.bandcamp.com/releases Top

Top

Please visit our friends in the surf music community:

Thanks to all the surf bands, past and present. And thanks to all the fans who care about and keep surf music alive.