so you tried it and it sounds terrible with a shorter pan, right?
or you are just guessing?
SHADOWNIGHT5150:
I like big reverb and i cannot lie
253 days ago
SHADOWNIGHT5150:
Bank accounts are a scam created by a shadow government
253 days ago
sysmalakian:
TODAY IS MY BIRTHDAY!
240 days ago
dp:
dude
221 days ago
Bango_Rilla:
Shout Bananas!!
176 days ago
BillyBlastOff:
See you kiddies at the Convention!
160 days ago
GDW:
showman
111 days ago
Emilien03:
https://losg...
33 days ago
Pyronauts:
Happy Tanks-Kicking!!!
26 days ago
glennmagi:
CLAM SHACK guitar
12 days ago
#ShallowEnd is empty.
No polls at this time. Check out our past polls.
No contests at this time. Check out our past contests.
Joined: May 27, 2007 Posts: 254 Madrid, Spain |
so you tried it and it sounds terrible with a shorter pan, right? |
Joined: Jul 06, 2010 Posts: 596 Stockholm |
Hi For hum problems you can experiment with: In order to find out where the hum comes from, you can experiment with: If nothing helps, try another power supply. Most modern switch-mode power supplies should work. |
Joined: Jan 04, 2011 Posts: 1588 Berlin L-Berg |
andreuthegiant wrote:
A shorter pan or a 3 spring pan will not have that drippy reverb sound we all came here for. — |
Joined: May 27, 2007 Posts: 254 Madrid, Spain |
Yep, Sancho, I know the theory, but I'm a experimentalist Last edited: Feb 15, 2015 12:25:11 |
Joined: May 20, 2009 Posts: 525 Leipzig |
I tried the short one and it was absolutly shitty sounding. —http://www.reverbnation.com/bangmustang |
Joined: Aug 29, 2009 Posts: 1556 Israel |
I tried a short one too. Bah. Flat and uninspiring. Last edited: Feb 15, 2015 15:50:42 |
Joined: Feb 08, 2015 Posts: 32 Chicago |
Anyone use a 2 spring pan? |
Joined: Dec 17, 2012 Posts: 519 Vienna |
... the accutronics has 2 springs ... —http://www.surfgrammeln-san.org |
Joined: Feb 08, 2015 Posts: 32 Chicago |
Thanks |
Joined: Sep 09, 2008 Posts: 3158 Guildford England |
Speaking of the shorter pan I have an short pan which originally came from a solid state Vox practice amp. Would it be safe to connect it to my Surf Bear, It reads 19ohms in and out. Why? I'm wondering what would happen if I submerged it in mineral oil. I've seen working computers submerged this way so I'm guessing it would be safe but what might it sound like? |
Joined: Jul 06, 2010 Posts: 596 Stockholm |
crumble wrote:
Sure, it would be safe to try pans with other impedance's, but the volume of reverb signal will probably be lower than you are used to. I dont know anything about mineral oil, but I remember I have read that some old reverbs used oil. |
Joined: Jul 24, 2012 Posts: 2762 Finknabad, Squinkistan |
That sounds like a cool Young Frankenstein/Reanimator idea. You should rig it up in a clear case with fake electrodes and maybe a Tesla coil on top, a green light shining through the oil and a bubbler aerating the 'reanimator tank' from the bottom. crumble wrote: — |
Joined: Sep 09, 2008 Posts: 3158 Guildford England |
JObeast wrote:
Submerge the whole caboodle in a fish tank! |
Joined: Jan 16, 2015 Posts: 36 |
First post here. Thanks to all on this thread for the helpful info. Much appreciated. I wanted to share my build. I used the SMD version since it was so much smaller. Put it into a 125B enclosure. I mounted the pan in the back of the amp. And just run the RCA to and from the pedal. I've gigged a bunch with this and its totally quiet. Only MOD I did was to have switchable MIX pots so I can toggle between two different MIX settings. Put the pots on a 4PDT stomp along with a bi-color LED (blue/green) to indicate which pot is selected. Ran out of green knobs, but I'll replace the purple one with a green one when I get a chance so the blue and green knobs will match the LED color toggle. The great thing about having the PCB in a pedal is that I can add pans to all of my non-verb amps and use this single pedal with all of them. Pretty nice! Thanks again to everyone. |
Joined: Jan 16, 2015 Posts: 36 |
Forgot some pics. Here they are.
|
Joined: Jan 04, 2011 Posts: 1588 Berlin L-Berg |
Hey there and welcome to the forum. Do you have some pics to share? That'd be great! — |
Joined: Aug 29, 2009 Posts: 1556 Israel |
Kinsky, welcome! |
Joined: Jul 06, 2010 Posts: 596 Stockholm |
kinski wrote:
Welcome Kinski, a very nice build! The neat thing about a switchable Mix is that it eliminates the need for a on/off switch. If needed, just to set on of them to zero ! |
Joined: Jan 16, 2015 Posts: 36 |
Thanks guys! Much appreciated. Yeah, exactly, I usually set one mix pretty wet and the other much lower or all the way down. However, with the mix all the way down there is still a VERY SLIGHT amount of reverb that can be heard. Thanks for the great project, Björn! |
Joined: May 20, 2009 Posts: 525 Leipzig |
Hey Kinski, yes Björn and I discused about switchable mix settings. How did you do it? Could you post a circuit diagram? http://www.reverbnation.com/bangmustang |