Menu
I ran into a similar problem with my AVRI Jazzmasters.....I determined that when
the switch was actually in the lead position, it was making contact with the
brass shield and shorting out intermittenly. I removed the pick guards on these
guitars and tapped a recess in the brass shield with the round side of a small
ball peen hammer....that fixed the problem, however one of my AVRI's has an
annoying resonant buzz where the lever itself will ring out on certain notes, I
might try a dab of silicon GREASE on the pivot area only and see if that dampens
out the annoying buzz. And hey you CIJ fans......I never had this problem with
my CIJ's and I replaced all their switches with the correct American
parts.......figure.....always tweakin'.....eddie k
Roland Bettenville <> wrote:contact spray
and if that does not help clean the contacts with the finest available grid
of sandpaper.
Roland Bettenville
-------Oorspronkelijk bericht-------
Van: sidewalksurf
Datum: 09/09/05 14:28:53
Aan:
Onderwerp: [SurfGuitar101] Jazzmaster toggle buzz
I recently changed the pickguard on my JM and shortly thereafter
started getting some buzzing/crackling on the toggle when I switch
pickups. I re-checked all of the connections and everything seems
okay. Any suggestions??
..
Visit for archived messages,
bookmarks, files, polls, etc.
Yahoo! Groups Links
[Non-text portions of this message have been removed]
.
Visit for archived messages,
bookmarks, files, polls, etc.
SPONSORED LINKS
Guitar music theory Stringed instruments Guitar music book Guitar sheet music
Guitar technique Guitar music
---------------------------------
YAHOO! GROUPS LINKS
Visit your group "SurfGuitar101" on the web.
To unsubscribe from this group, send an email to:
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
[Non-text portions of this message have been removed]
