Menu
Sounds good, Casey. thanks,
Marty
----- Original Message -----
From: surfgitar
To:
Sent: Friday, November 12, 2004 9:00 PM
Subject: [SurfGuitar101] Re: Quick fret fix(or nut job)
Marty, Here's a suggestion I got from a guitar tech to cure a nut slot
that was too big. He sold me a small bone block, looks like it could
be used to make the nut from. Sand it down and mix the dust with a
drop of glue to form a paste. Put a little of this in the string slot,
after it dries you can cut the string slot out at the correct width.
It worked fine for me. Should have less effect on sustain and last a
while
casey
--- In , "Jeff" <bigtikidude@y...> wrote:
>
> Marty,
> That's kinda what I did for my Bass.
> My A string was buzzing in the nut. So i took a small piece of
> paper, folded it over once, and stuck in in there around the string
> in the nut groove. Walah no more buzz. every once in awhile when I
> tune the sting I need to reposition it in the nut.
> Jeff(bigtikidude)
>
>
>
> --- In , "Marty Tippens"
> <mctippens@e...> wrote:
> > This has gotta be the stupidest, most hair-brained idea I have come
> up with, and it works beautifully!
> >
> > The 9th fret on my low E-string buzzed like a bee. It was the only
> buzz on the whole neck. I raised the action and that helped a bit,
> but now the action was too high and the buzz was still detectable. It
> was clear that the 9th fret was a hair too low at the low E end and
> could use a lift. But this is a nice bound neck on a vintage Mosrite.
> The original frets are in great shape over-all. I didn't want to take
> it in for a fret job.
> >
> > My answer was in the kitchen drawer. What better to give some rise
> to the fret under the low E than Scotch tape?! I slapped a little
> half inch length of tape over the fret and guess what...it didn't
> work, the fret still buzzed. BUT a second piece on top of the first
> did the trick and killed that buzzy bee like fly paper. Did the tape
> cause other buzz at the 8th or 7th frets or...? Nope!! I dropped the
> action back down nice and low and it plays wonderfully.
> >
> > The side affects of this operation are:
> >
> > 1. A very slight decrease in sustain at the taped-over fret. After
> all, the string is now touching plastic tape and not a metal fret.
> The slight decrease in sustain at the one fret is much preferable to
> the previous annoying buzz.
> >
> > 2. The tape will probably have to be replaced every six months or
> less. I'll do that whether it needs it or not 'cause I don't want a
> sticky stuff problem.
> >
> > 3. This trick might be a bit of a problem under higher strings that
> get a lot of bending action. The bending of the string probably would
> cut into the tape.
> >
> > -Marty
> >
> > [Non-text portions of this message have been removed]
.
Visit for archived messages,
bookmarks, files, polls, etc.
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
b.. To unsubscribe from this group, send an email to:
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
