Menu
I think Ran has covered a lot of the potential problems . . .
I would check out the tubes and the tube holders (are they tight and making
contact with the tube pins?) - you may want to take some light gauge steel
wool and remove any possible corrosion from the tube pins.
Another culprit is often the RCA cord connections that go to/from the reverb
pan - check those out, too. Sometimes, they can be slightly unplugged while
in transit, etc.
Just be sure to not have the tank plugged in when checking stuff out - good
luck!
-Dick
----- Original Message -----
From: "Ran Mosessco" <>
To: <>
Sent: Tuesday, July 20, 2004 8:45 PM
Subject: Re: [SurfGuitar101] Re: Reverb Tank Help!
> You'd still get guitar sound with the holder pushed in. I recorded a few
> live to 2 tracks songs like that unfortunately...
> About your problem, I can't offer a positive solution, but I'd start with
> tubes (easy to swap) - although I think that might not be your problem.
> Another thing you can try without hurting yourself is swapping a tank
(pan)
> if you got a Fender amp with a similar one. That's probably not it,either,
> but you should check that, just in case.
> I think you might have a bad connection somewhere before the signal goes
> into the reverb pan, or possibly a problem in the reverb transformer.
>
> I think the guys over at the Fender forum can help you more.
>
> Good luck,
>
> Ran
> ----- Original Message -----
> From: "supertwangreverb" <>
> To: <>
> Sent: Tuesday, July 20, 2004 4:57 PM
> Subject: [SurfGuitar101] Re: Reverb Tank Help!
>
>
> > Gavin,
> >
> > The tank holder is pulled back. Would I still get guitar sound
> > with the tank holder pushed in??
> >
>
>
>
>
>
> .
> Visit for archived messages,
bookmarks, files, polls, etc.
>
> Yahoo! Groups Links
>
>
>
>
>
