SG101 logo
SG101 Banner

Photo of the Day

OutwerWave meet Herbie
OutwerWave meet Herbie

IRC Status
  • racc
Current Polls
  • No polls at this time. Check out our past polls.
Current Contests
Donations

Help us meet our monthly goal:

35%

Donate Now

April Birthdays

Yahoo Group Archives »

Re: Reverb Tank problem

Dick (flatwound01) - 19 Sep 2003 09:41:23

Thor:
A few things you can check come to mind:
1) Look at the RCA input/output cables that go from the reverb pan to
the chassis - I've heard stories about them failing. Look for any
kinks, splits, etc. in the cable sheath and check the cables with a
continuity tester to be sure they are good. Also, make sure that
they are plugged in well - sometimes they can work loose.
2) Look for loose wires in the chassis - take the back off of the
tank and see if anything looks suspicious. Double check the
connections on the "quick" connectors back there to be sure they are
tight, too.
3) Have you tried replacing the tubes? Sometimes a failing tube, or
one that is going microphonic, can do some weird stuff . . like
causing strange oscillations that suddenly appear and can be
mysteriously cured by a good shaking (at least for a little while).
If the above two steps don't help, try swapping the tubes out and see
what happens.
As always, when you work on your tank, be sure to have it unplugged
from the mains power! Good luck!
-Dick
--- In , "Fred Pleasant"
<fredpleasant@y...> wrote:
> I've had a reissue reverb tank for a couple years now. I've always
> taken very very good care of it because I know the things are
> delicate. Yet, sometimes when I use it something happens and all
of
> a sudden all the reverb disapears and the sound becomes very thin,
> high pitched, and distorted. Sometimes smashing the pan lock into
> the pan a little returns the tank to normal function again,
> othertimes I don't know.. but it always needs a little shaking to
fix
> itself. Does anybody know what's wrong?
>
> Sometimes I can play an entire show with no problem, but tonight it
> happened atleast 4 times during our set. (One of our audience
> members was astonished at my ability to change the guitar effects
> without visably hitting any foot pedals or things like that.) I
have
> a hunch that it is caused by vibrations from speakers or the floor,
> but it could also be my imagination.
>
> Any ideas? Anybody have experience with this?
>
> -Thor, www.monstersfrommars.com

See this post in context.