Menu
typically..the "high" input is for high impedence
pickups...(aka "active pickups" or "pre-amp" pickups) the
"low" input
is for low ipedence pickups (aka passive pickups)...
sometimes Low and High stand for bass and treble
instruments...but, those are real old amps...like '40s or
50's amps...
good luck!
dp
--- Ryan <> wrote:
> I went out and got a Holy Grail pedal, and have been
> messing around
> with it all afternoon.
>
> Just one question though. On the front of my amp there
> are two plug
> ins, one right above the other. Below the bottom one it
> says "input"
> and then above it it says "Low" and then above the other
> one it
> says "High".
>
> What is the difference between these inputs?
>
> On the back there is a "reverb" plug in and a
> "distortion" plug in,
> as well as a line and a phones plug in.
>
> Right now I have the guitar going to the input on the
> holy grail,
> which in turn is plugged into the "reverb" plug in. I
> then have a
> cable from the lower input plug on the front of the amp,
> going to the
> line plug in in the back of the amp.
>
> Is this "correct"?
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> To unsubscribe from this group, send an email to:
> .
> Visit for
> archived messages, bookmarks, files, polls, etc.
>
>
>
> Your use of Yahoo! Groups is subject to
>
>
>
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
