Menu
4AB3C1C
The model ending in B is the exact same and the only one I could find.
It works perfect.
--- In , John Brownlow <lists@j...> wrote:
> I tried it on the bench and now I'm getting no reverb at all
>
> I think one of the tubes is shot. The one on the far right.
>
> The unit has the holes where the lever used to be, but not the lever...
>
> What pan should come with a reissue?
>
>
>
>
>
> On Jul 29, 2005, at 1:06 PM, Marty Tippens wrote:
>
> > If you've already released the spring damper and it isn't giving
> > enough 'verb:
> > 1. Take off the front panel.
> > 2. Make sure the RCA's are connected to the spring tray.
> > 3. Make sure both springs are connected and vibrating freely.
> > 4. Slap it back together and listen see if the depth of reverb
> > hasn't returned.
> >
> > I did this process, found nothing wrong yet when I slapped it back
> > together I musta done something right 'cause the full reverb had
> > returned. I'm thinking a spring was cause on the felt pad.
