Looking for a 2x12 that would go with this head. But the output to the loudspeakers are wired in parrallel? Not to sure. Here's what the manual says: "Always provide the AVT50H with a load equal to, or greater than, 4 Ohms. USING the TWO loudspeaker outputs, with cabinets rated at 8 Ohms each, the full 50W of the specially designed AVT power amplifier will be unleashed." Heck, can some show me how I should wire the speakers for a 2 x 12 so it is compatible with the Marshall AVT50H, so I don't ruin the head or anything.