January Birthdays 
mike_fried wrote:
Badger wrote:
I'm assuming this (resistor) goes, specifically on a JM, between the output and the wiper (middle lug), since the right lug (looking at it flipped over) is taken up with a bunch of bonded ground terminations on the back of the pot.
Actually, you do want to put it across the pot's outside terminals (input and ground connections). Connecting it to the wiper will only change the pot's taper, not the pot's loading to ground.
Got it; many thanks for the clarification. The light bulb is coming on now, dimly, but on.
Wes
SoCal ex-pat with a snow shovel
DISCLAIMER: The above is opinion/suggestion only & should not be used for mission planning/navigation, tweaking of instruments, beverage selection, or wardrobe choices.
