JoshHeartless
Joined: Jun 17, 2006
Posts: 1010
Bay City, Michigan
|
Posted on Oct 18 2006 12:54 PM
i had a sound city concord combo, but made a head out of it. the reverb unit sits on the bottom of the head, under the electrnics, and it has foam above and below it, and i put a small piece of cardboard under the unit to keep the foam from coming up and keeping the springs from moving.
would i get more reverb if it wasnt so confined? or are the springs inside the only things that really cant be touched? i know cocords arent really known for their reverb, but i dont think it's the original. plain and simple is im not getting enough reverb out of it. any suggerstions?
— The Tremblors on Facebook!
The Tremblors on MySpace!
|
JeffLeites
Joined: Mar 27, 2006
Posts: 343
North Hollywood, California
|
Posted on Oct 18 2006 01:31 PM
Is the pan on a different plane than it was when it was in the combo? The pans are made to be in a specific plane, (horizontal, open side down for example). If you have an accutronics pan, you can see a list of the codes on their website, that identifies how the pan should be mounted. That said, I don't know if that is your problem.
— My Web Site - Tunes - Pictures - Guitar Projects - Hard Rock Cafe Guitar Pins
|
JoshHeartless
Joined: Jun 17, 2006
Posts: 1010
Bay City, Michigan
|
Posted on Oct 18 2006 01:33 PM
it was vertical, now its horozontal, it fits better that way.
could that be it?
— The Tremblors on Facebook!
The Tremblors on MySpace!
|
SurfBandBill
Joined: Mar 15, 2006
Posts: 1487
San Francisco
|
Posted on Oct 18 2006 04:53 PM
Probably so... you gotta keep the pan the way it was stock -- besides, now your springs are fighting gravity!
~B~
|
April Birthdays 
