Photo of the Day
Shoutbox

SHADOWNIGHT5150: I like big reverb and i cannot lie
256 days ago

SHADOWNIGHT5150: Bank accounts are a scam created by a shadow government
256 days ago

sysmalakian: TODAY IS MY BIRTHDAY!
242 days ago

dp: dude
223 days ago

Bango_Rilla: Shout Bananas!!
178 days ago

BillyBlastOff: See you kiddies at the Convention!
162 days ago

GDW: showman
113 days ago

Emilien03: https://losg...
35 days ago

Pyronauts: Happy Tanks-Kicking!!!
29 days ago

glennmagi: CLAM SHACK guitar
14 days ago

Please login or register to shout.

Current Polls

No polls at this time. Check out our past polls.

Current Contests

No contests at this time. Check out our past contests.

Donations

Help us meet our monthly goal:

100%

100%

Donate Now

Cake December Birthdays Cake
SG101 Banner

SurfGuitar101 Forums » Gear »

Permalink The Double Neck Project

New Topic
Goto Page: Previous 1 2

Is the offset up and down measured from the center of the necks? My "DoubleMaster" drawing ended up with about 4 1/4" center to center....

Chris

"You can't tell where you're going if you don't know where you've been"

Sonichris
Is the offset up and down measured from the center of the necks? My "DoubleMaster" drawing ended up with about 4 1/4" center to center....

Chris

It is on center. Warmoth was about 4.89" (thick 4-7/8 ). You can do a mockup out of cardboard to see how that would fit and it can be adjusted because nothing is written in stone on these double necks in the link below.

http://surfneptune.com/Doublehigh.html

In this pic you can see it's whatever fits.

To answer the light body question, Swamp Ash will be the choice I made. I was going to order 2 blanks pre router, then cut them to size and glue them together, but the cost is toooooo much. There are some local wood supply warehouses (Higgin's and OrePac) who have the stuff by the truck loads. I'll be back with that cost option later. In the mean time I gotta go find a Tele and do the Dims off it and start the template.

On with the maddness.
Hap

Note: That mosrite univox double is hard to play, it is un-ballanced, too tight between the necks, and In my opinion it is better to have the guitar on the bottom, I am fairly tall and find that the guitar on the bottom fell roughly where I would wear a strat anyway, and PLaying bass up a little higher felt easier on my hands...

Just to give you considerations when coming up with a design.

THe NEpTuNeS

Goto Page: Previous 1 2
Top