craigjames
Joined: Nov 23, 2008
Posts: 2
|
Posted on Nov 23 2008 03:04 AM
i just stumbled upon this thread and i am very interested!!!! ive had this pedal for a few years and to be honest, it hasnt seen much use lately..BUT i am really eager to try some of these mods they sound sweet. now im pretty sure i read the whole thread, and i didnt see a true bypass mod..is this someting i missed or even possible?? i noticed a big difference in tone when the pedal is off....thanks for all the great info!!!!!
|
craigjames
Joined: Nov 23, 2008
Posts: 2
|
Posted on Nov 23 2008 03:29 AM
..just wanted to add that i am playing strats through a deluxe reverb ri and i keep the reverb around 3 all the time...looking to kick in some extra every now and then
|
DeadRanchHands
Joined: Apr 15, 2008
Posts: 1281
|
Posted on Nov 23 2008 09:27 AM
Hello,
I haven't attempted a true bypass mod for the Spring King. Mostly because I'm not terribly bothered by the bypass. I am working on a diy 9v spring reverb, and that will be true bypass. Another forumite here is also working on one.
I don't really have time or motivation to try to TB the Spring King, but I suppose you could always put it in a TB loop.
— http://www.reverbnation.com/thedeadranchhands
http://www.youtube.com/watch?v=jZEW74mHjQk
|
DeadRanchHands
Joined: Apr 15, 2008
Posts: 1281
|
Posted on Jan 21 2009 12:45 PM
In response to more emails and also due to my laziness, I'm just going to post the second part of the mod directions publically:
Here are more advanced mod instructions - this mod is most useful if you're using an outboard reverb tank. If you're sticking with the internal tank, it's probably not worth the trouble, as it seems to easily overload the smaller stock tank. It sounds great with an Accutronics 4AB3C1B tank though.
image
If you use an external tank, you can desolder the green and black wires running from the board to the internal tank, and solder in new wires from the board to two RCA jacks mounted on the side of the Spring King. You can then plug in RCA cables and run them to the external tank.
I forget what value cap I've got in there right now - I just know it's not as extreme as what I was using before. Remember, smaller cap = less bass going into the springs. If you find a couple of values you like, you can wire a cap in there and switch between the two.
I'm not responsible if you destroy your pedal - try at your own risk. This isn't an appropriate first DIY project due to the small size of the components.
— http://www.reverbnation.com/thedeadranchhands
http://www.youtube.com/watch?v=jZEW74mHjQk
|
MilkManX
Joined: Jan 16, 2009
Posts: 65
Tucson AZ USA
|
Posted on Jan 22 2009 01:33 PM
That is awesome! I may just have to try this...
|
Brian
Joined: Feb 25, 2006
Posts: 19265
Des Moines, Iowa, USA
|
Posted on Jan 22 2009 02:17 PM
You know the geek in me thinks this is awesome that you figured out how to mod this pedal. I certainly appreciate the hacker ethic at work here.
On the other hand, the only mod I would do to such a pedal is run it over with my car. For surf music, nothing beats an outboard reverb tank. This perhaps cannot be appreciated by those who have never played through one (except if you are Canadian Mel). It will really blow you away. So if you are interested in surf music, don't spend a lot of time playing with pedals or modding them, just buy a reverb unit.
— Site dude - S3 Agent #202
Need help with the site? SG101 FAQ - Send me a private message - Email me
"It starts... when it begins" -- Ralf Kilauea
|
zak
Joined: Sep 24, 2007
Posts: 2728
|
Posted on Jan 22 2009 02:24 PM
This post has been removed by the author.
|
surferXmatt
Joined: Aug 27, 2008
Posts: 1570
New York
|
Posted on Jan 22 2009 02:54 PM
What is Mel's deal with outboard reverb? Pardon my ignorance.
|
Brian
Joined: Feb 25, 2006
Posts: 19265
Des Moines, Iowa, USA
|
Posted on Jan 22 2009 03:00 PM
(Canadian) Mel is the only person on this forum who hates his outboard reverb unit.
— Site dude - S3 Agent #202
Need help with the site? SG101 FAQ - Send me a private message - Email me
"It starts... when it begins" -- Ralf Kilauea
|
surferXmatt
Joined: Aug 27, 2008
Posts: 1570
New York
|
Posted on Jan 22 2009 03:04 PM
Hates his own particular unit? Or hates all units?
|
zak
Joined: Sep 24, 2007
Posts: 2728
|
Posted on Jan 22 2009 03:05 PM
This post has been removed by the author.
|
surferXmatt
Joined: Aug 27, 2008
Posts: 1570
New York
|
Posted on Jan 22 2009 03:07 PM
My wife is a Canadian. They can be an unruly bunch. Cough Zak Cough
|
zak
Joined: Sep 24, 2007
Posts: 2728
|
Posted on Jan 22 2009 03:08 PM
This post has been removed by the author.
Last edited: Sep 23, 2009 21:50:21
|
surferXmatt
Joined: Aug 27, 2008
Posts: 1570
New York
|
Posted on Jan 22 2009 03:18 PM
Never once has she used anything remotely close to that word, haha.
|
DeadRanchHands
Joined: Apr 15, 2008
Posts: 1281
|
Posted on Jan 23 2009 05:11 PM
Brian
You know the geek in me thinks this is awesome that you figured out how to mod this pedal. I certainly appreciate the hacker ethic at work here.
On the other hand, the only mod I would do to such a pedal is run it over with my car. For surf music, nothing beats an outboard reverb tank. This perhaps cannot be appreciated by those who have never played through one (except if you are Canadian Mel). It will really blow you away. So if you are interested in surf music, don't spend a lot of time playing with pedals or modding them, just buy a reverb unit.
I have no doubt this isn't as good as a Fender '63 Reverb. However, it is a good sounding reverb with the mods, and it makes a totally legit surf sound. Mine cost $50, and the extra parts for the mod cost maybe $3. Add another $30 for the 4AB3C1B tank.
I am working on a DIY solid state reverb, using the same tank, and some basic design principles from the Fender tube unit. Hopefully I'll actually finish it. I'm sticking my neck out a little, but I doubt the reason the Fender sounds so great has anything to do with tubes, but rather with the amount of current hitting those springs, and the tone shaping and clean/wet mix capabilities. I'm speaking out of partial ignorance, having never played the Fender, but when it comes to reverb, the actual signal being passed through the springs is always going to be severly degraded by the process anyway, no matter what you do. I think the main thing is to just make sure you hit the springs with enough current and the right eq to get that drip sound, and it shouldn't matter if you use tubes or op amps or a flux capacitor to do it.
Feel free to crank the flame throwers up to 11.
— http://www.reverbnation.com/thedeadranchhands
http://www.youtube.com/watch?v=jZEW74mHjQk
|
synchro
Joined: Feb 02, 2008
Posts: 4420
Not One-Sawn, but Two-Sawn . . . AZ.
|
Posted on Jan 23 2009 05:15 PM
UmaFloresta
Brian
You know the geek in me thinks this is awesome that you figured out how to mod this pedal. I certainly appreciate the hacker ethic at work here.
On the other hand, the only mod I would do to such a pedal is run it over with my car. For surf music, nothing beats an outboard reverb tank. This perhaps cannot be appreciated by those who have never played through one (except if you are Canadian Mel). It will really blow you away. So if you are interested in surf music, don't spend a lot of time playing with pedals or modding them, just buy a reverb unit.
I have no doubt this isn't as good as a Fender '63 Reverb. However, it is a good sounding reverb with the mods, and it makes a totally legit surf sound. Mine cost $50, and the extra parts for the mod cost maybe $3. Add another $30 for the 4AB3C1B tank.
I am working on a DIY solid state reverb, using the same tank, and some basic design principles from the Fender tube unit. Hopefully I'll actually finish it. I'm sticking my neck out a little, but I doubt the reason the Fender sounds so great has anything to do with tubes, but rather with the amount of current hitting those springs, and the tone shaping and clean/wet mix capabilities. I'm speaking out of partial ignorance, having never played the Fender, but when it comes to reverb, the actual signal being passed through the springs is always going to be severly degraded by the process anyway, no matter what you do. I think the main thing is to just make sure you hit the springs with enough current and the right eq to get that drip sound, and it shouldn't matter if you use tubes or op amps or a flux capacitor to do it.
Feel free to crank the flame throwers up to 11.
No flame from here. Not everyone is in a position to buy a good tank and this, while certainly a compromise, is a good compromise. Beyond that, it's ingenuity at its best. What's not to like?
— The artist formerly known as: Synchro
When Surf Guitar is outlawed only outlaws will play Surf Guitar.
|
Brian
Joined: Feb 25, 2006
Posts: 19265
Des Moines, Iowa, USA
|
Posted on Jan 23 2009 06:06 PM
My remark was partially made in jest. But seriously, once you have played through a reverb unit, all discussion is over. Again, if you haven't done this, you don't know what you are missing. It really is that good.
Like I said, it is cool you have figured out how to do this. In my mind however, it is totally misplaced effort. But, have fun doing it and don't let me be a wet blanket.
— Site dude - S3 Agent #202
Need help with the site? SG101 FAQ - Send me a private message - Email me
"It starts... when it begins" -- Ralf Kilauea
|
TwangOmatic
Joined: May 16, 2008
Posts: 123
|
Posted on Jan 23 2009 07:00 PM
It sounds pretty good to me.
|
DeadRanchHands
Joined: Apr 15, 2008
Posts: 1281
|
Posted on Jan 23 2009 09:17 PM
Brian
My remark was partially made in jest. But seriously, once you have played through a reverb unit, all discussion is over. Again, if you haven't done this, you don't know what you are missing. It really is that good.
Like I said, it is cool you have figured out how to do this. In my mind however, it is totally misplaced effort. But, have fun doing it and don't let me be a wet blanket.
I agree I need to play through the real deal before I'll get the complete picture. Maybe once I complete my DIY project I'll get a chance to A/B it with a tube unit. Of course, work and school have slowed that down considerably. I just barely have enough free time to write some music now and again, let alone tinker with electronics.
— http://www.reverbnation.com/thedeadranchhands
http://www.youtube.com/watch?v=jZEW74mHjQk
|
DeadRanchHands
Joined: Apr 15, 2008
Posts: 1281
|
Posted on Jan 23 2009 09:19 PM
synchro
No flame from here. Not everyone is in a position to buy a good tank and this, while certainly a compromise, is a good compromise. Beyond that, it's ingenuity at its best. What's not to like?
TwangOmatic
It sounds pretty good to me.
Thanks guys
— http://www.reverbnation.com/thedeadranchhands
http://www.youtube.com/watch?v=jZEW74mHjQk
|