Photo of the Day
Shoutbox

SHADOWNIGHT5150: I like big reverb and i cannot lie
256 days ago

SHADOWNIGHT5150: Bank accounts are a scam created by a shadow government
256 days ago

sysmalakian: TODAY IS MY BIRTHDAY!
242 days ago

dp: dude
223 days ago

Bango_Rilla: Shout Bananas!!
178 days ago

BillyBlastOff: See you kiddies at the Convention!
162 days ago

GDW: showman
113 days ago

Emilien03: https://losg...
35 days ago

Pyronauts: Happy Tanks-Kicking!!!
29 days ago

glennmagi: CLAM SHACK guitar
14 days ago

Please login or register to shout.

Current Polls

No polls at this time. Check out our past polls.

Current Contests

No contests at this time. Check out our past contests.

Donations

Help us meet our monthly goal:

100%

100%

Donate Now

Cake December Birthdays Cake
SG101 Banner

SurfGuitar101 Forums » Gear »

Permalink Jaguars and string gauges

New Topic
Page 1 of 1

I recently snagged an old mid-60s parts Jag and I really like it so far. I've got it strung up with .010s and am pretty happy but I've read a lot about how they work and sound better with at least .011s (and possibly flats). Before I go out and buy a few sets to experiment with could anybody tell me approximately what gauge strings the original nut would have been cut for back in 1964? Since I actually like the .010s I don't want to start filing the nut to accomodate bigger low E-strings but I've got to assume that the gauges were quite a bit heavier back then and that I can at least go to something around a .050 on the low end.

I'd say 11's have to be the minimum for a jag. Preferably 12 or 13 flats would be your better bet.

i've got 11's on my jag and at the suggestion of dave wronski i just ordered some chrome flatwound 11's to try out

www.surfintheeye.com

It sounds like I'm definitely going to be trying out some .011s to see how much difference they make. My biggest concern was that I didn't want to have to file the original nut. I tried to put some .011s on one of my Rickenbackers a few years back and there was no way that the E and A strings were fitting in the factory slots.

Do the flats deaden the sound too much? I tried some Pyramid flats on one of the Ricks and they didn't ring out as nicely as rounds and were way too stiff for me.

Thanks.

Nuts are easy enough to remove, replace it with a new one, bone or tusk pre cut for 13's. Trust me, the heavier strings are not that big a deal. Your sound will improve, doublepicking is easier, and bridge issues usually go away.

Danny Snyder

"With great reverb comes great responsibility" - Uncle Leo

Playing keys and guitar with Combo Tezeta

Formerly a guitarist in The TomorrowMen and Meshugga Beach Party

Latest surf project - Now That's What I Call SURF

Danny has just double picked the correct.

Page 1 of 1
Top