I recently bought a fun SGV 800
The action is a bit high on the neck, was wonering what is the way to decrease the action
midwestsurfguy:
Merry Christmas!
284 days ago
sysmalakian:
HAPPY NEW YEAR!
278 days ago
SabedLeepski:
Surfin‘ Europe, for surf (related) gigs and events in Europe https://sunb...
239 days ago
SHADOWNIGHT5150:
I like big reverb and i cannot lie
172 days ago
SHADOWNIGHT5150:
Bank accounts are a scam created by a shadow government
172 days ago
sysmalakian:
TODAY IS MY BIRTHDAY!
158 days ago
dp:
dude
139 days ago
Bango_Rilla:
Shout Bananas!!
94 days ago
BillyBlastOff:
See you kiddies at the Convention!
79 days ago
GDW:
showman
30 days ago
#ShallowEnd is empty.
No polls at this time. Check out our past polls.
No contests at this time. Check out our past contests.
Joined: Sep 28, 2024 Posts: 3 |
I recently bought a fun SGV 800 |
Joined: Jan 06, 2019 Posts: 165 Bananas, TX |
|
Joined: Sep 02, 2022 Posts: 472 Central VA |
Lots of things you can do. As Bango Rilla mentioned, since the SGV800 is a bolt-neck guitar, you can insert a thin shim at the base of the heel of the neck. This will slightly alter the angle of the neck compared to the top of the body, perhaps making the strings more easily adjusted to action you prefer. When I used to do things like this for clients, I would use the flaps from breakfast cereal boxes and cut thin shims from them. I would also use discarded saxophone and clarinet reeds. It may be that your nut is too tall, in which case you could grab a piece of fine sandpaper and a nice, flat surface and take a few thousands of an inch off the bottom of the nut. This could be a little scary unless you've done it before, so it might not hurt to consult with a qualified guitar tech. —-- |
Joined: Mar 06, 2006 Posts: 1891 Wear gloves - I'm in the Rockies |
I don't remember exactly how to adjust these at the bridge, but a quick look on the internet reminded me that these have essentially, a Mosrite style roller bridge with what are most likely two adjustable posts. Remove the locking nut on top of each post, and the answer might reveal itself. The adjustment might even be the nut itself. Edit - Yamaha still has an online repair manual for these. Such a cool company! And I was right, under the lock nut is an allen height adjustment screw. https://www.manualslib.com/manual/267152/Yamaha-Electric-Guitar-Sgv-Series.html?page=6#manual —"You can't tell where you're going if you don't know where you've been" Last edited: Oct 01, 2024 17:26:35 |
Joined: Sep 28, 2024 Posts: 3 |
Sonichris wrote:
BRILLIANT THANK YOU! |
Joined: Sep 28, 2024 Posts: 3 |
chiba wrote:
I think i'll take it to my local luthier, thanks for the help! |